Home/Blog/Clay Agency
Lead Generation & Lead Management

Clay agency: what it does and how to choose the right one

What a Clay agency does, when you need one and how to spot a good one. With a checklist, results from Clay projects and answers on cost and process.

Nicolas Schell
Co-Founder & CEO, Scalantec
Published ·Updated ·7 min read
Wide light blue rows at the top narrowing row by row until only a few navy bricks and one amber brick remain at the bottom
Discuss this article with AIChatGPTClaudePerplexityGoogle AI Mode

A Clay agency builds the contact lists, data enrichment and buying signals in Clay that let your sales team reach the right companies at the right moment. This guide covers when that pays off and how to tell a good agency from the rest.

What a Clay agency does

Clay brings data from more than 200 sources together in one table, cleans it and adds to it with AI agents. The tool alone doesn't book a meeting. A Clay agency decides which data you actually need, builds the workflows for it and makes sure the results reach your CRM and your outreach. In practice that means four jobs.

Map your whole market

The agency collects every company that fits your ICP, removes duplicates and scores each one against your criteria. For Cosuno we analysed around 400,000 companies in DACH this way and found around 40,000 good-fit accounts that were missing from the CRM.

Cosuno case study

Enrich contacts

Clay asks several data providers in turn for an email address or phone number until a result passes the check (waterfall enrichment). You find more contact data than with any single provider, and the expensive sources only run where the cheap ones came up empty.

What is data enrichment?

Spot buying signals

Job changes, funding rounds, new job postings or visits to your website automatically trigger the next touch or a task for your team. At Charles, Clay enrichment detects job changes and confirms whether a contact still works at the company.

Charles case study

Connect your CRM and outreach

Clay connects directly to Salesforce, HubSpot and sending tools such as lemlist or Instantly. An agency makes sure enriched data lands cleanly in the CRM, that duplicates and exclusion lists are checked before the first send, and that every reply goes straight to your team.

Outbound with Scalantec

In-house or with an agency?

Clay is no miracle tool, says Scalantec co-founder Nicolas Schell on the Sales Pepper podcast. Whether you need an agency depends less on the tool than on your team and your goal.

Building it yourself works when

  • someone on your team has time to learn Clay, data providers and APIs,
  • you start with a single use case, such as enriching the contacts already in your CRM,
  • you can spot-check the results yourself on a regular basis.

An agency pays off when

  • you need results in weeks rather than months and have no GTM engineer on the team,
  • Clay has to work together with your CRM, sending tools and several data providers,
  • you need predictable costs, because auto-update left on in enrichment columns can quietly burn through a lot of credits.

Either way, Clay makes little sense without a clearly defined ICP and product-market fit. In that case phone, hand-written emails and LinkedIn messages are the better start. To check whether you are ready, use the checklist in Too early for an outbound agency?

Checklist for choosing a Clay agency

Any Clay agency should be able to answer these seven questions in the first call.

1. Is the agency listed as a Clay Solutions Partner?

Clay reviews an agency's Clay builds and client testimonials before adding it to its partner directory. You can look the listing up there yourself.

2. Are there results with names attached?

Look for case studies that name the client, the time frame, the tools used and concrete numbers rather than anonymous percentages.

3. Who builds your system?

Ask whether experienced engineers work with you directly or whether an account manager sits in between and just passes requests along.

4. Who owns the system in the end?

The workflows should live in your CRM and your tools, so you can take everything over at any time.

5. How does the agency handle credits?

Good answers: auto-update only where it is needed, your own API keys for AI tasks in Claygent, and your own data-provider subscriptions where they cost less than Clay credits.

6. How is data quality checked?

Every waterfall needs a validation rule, otherwise wrong numbers end up in the CRM. Before the first send, duplicates should be removed and your exclusion lists matched.

7. What happens outside Clay?

Clay is one building block. Ask about the CRM, sending tools and deliverability, and how the agency works if your data protection team has not yet approved Clay. One example is our GTM audit for PAIR Finance.

How we work with Clay at Scalantec

Clay is at the heart of the systems we build for clients. According to Nicolas Schell, B2B outbound has so far been the largest part of the work, alongside CRM enrichment and signal-based approaches. More and more projects therefore start with an analysis of won and lost deals and a clear picture of your ideal customers. Outbound is then one of several ways to turn that into pipeline.

1. Free 30-minute call

A GTM engineer looks with you at where your sales loses pipeline and whether Clay is the right tool for it.

2. A clearly scoped build phase

We build lists, enrichment, buying signals and outreach in your CRM and your tools. The first meetings usually come one to two months from the start of the project.

3. Ongoing operation

We run the system and improve it every month.

4. Handover whenever you want

You own the system. Charles runs its system itself today, and Impossible Cloud handed outbound to its own team after the first month.

Experienced engineers work on your system, with no account manager in between. David Weidner, Senior GTM Engineer, is our Clay expert. Vishesh Jain was one of the first employees at Clay. Since 2024 we have hosted Clay Club Berlin, the meetup of the Clay community in Berlin. Working with us starts at €4,900 per month. More about us on the team page.

Results from Clay projects

  • €2.6M+ qualified pipeline in one quarter for Seven Senders, with Clay and Salesforce
  • 40,000 new good-fit accounts from around 400,000 companies analysed in DACH for Cosuno
  • +50% booked meetings on the same lead flow for Charles, with lead scoring and Clay enrichment
  • 8.5% reply rate across all campaigns for Seven Senders, against an industry average of 1 to 3%

Clay Partner of the Year 2026 in the Advanced Artisan category

“We generated significant six-digit ARR pipeline in our first month with Scalantec. They immediately validated automated outbound as a successful channel for us.”

Armin Rachwalik, Director Commercial Strategy, Impossible Cloud

Questions about Clay agencies

What is a Clay agency?

An agency that designs, builds and runs sales systems on Clay: market lists, data enrichment, buying signals and the connection to your CRM and outreach. Clay vets agencies before adding them to its partner directory as Solutions Partners.

How much does a Clay agency cost?

Working with Scalantec starts at €4,900 per month. For Clay itself, Nicolas Schell puts the cost at a few hundred euros a month at least, plus sending tools and data providers. In a free 30-minute call we work out which services you actually need.

When is Clay not worth it?

Without a clearly defined ICP, without product-market fit, or on a very tight budget. In that case phone, hand-written emails and LinkedIn messages are the better start.

How quickly will we see results?

The first meetings usually come one to two months from the start of the project.

Is Scalantec a Clay agency in Germany?

Yes. We are based in Berlin and work mainly with B2B companies in Germany, Austria, Switzerland and the US. At its first Partner Day in San Francisco, Clay named us Partner of the Year 2026 in the Advanced Artisan category.

Does Scalantec only work with Clay?

No. Clay is one building block. We build in the client's CRM (HubSpot, Salesforce, Microsoft Dynamics) and use tools such as lemlist, HeyReach, EmailBison, n8n, Make, Claude and OpenAI, depending on the job.

Who owns the system when we stop working together?

You do. We build everything in your CRM and your tools, and you can take it over at any time.

Talk through your Clay project.

In a free 30-minute call we look at where your sales loses pipeline and whether Clay is the right tool for it.

Book a Call
Nicolas Schell
Co-Founder & CEO, Scalantec

Nicolas Schell is co-founder and CEO of Scalantec. Before Scalantec he worked at McKinsey and Celonis. Today he and his team build outbound and RevOps systems for B2B companies, and he organizes Clay Club Berlin.

Related articles