Home/Blog/What B2B Buyers Ask in First Calls
Sales Automation & RevOps

The Layer Under Outbound: What B2B Buyers Really Ask in First Sales Calls

We analyzed 67 first sales calls, buyers' words only. 59% were about CRM, data, scoring and signals. Only 26% were about outbound.

Nicolas Schell
Co-Founder & CEO, Scalantec
Published ·Updated ·8 min read
Layered bricks: a thin light blue outbound layer on top, a red seam below it, and a much deeper navy data layer underneath
Discuss this article with AIChatGPTClaudePerplexityGoogle AI Mode

Most people who book a first call with us want to talk about outbound. At least that's what we assumed. Then we analyzed 67 first sales calls, looking only at what the buyers said, and the picture changed: 59% of their topics were about CRM, data quality, lead scoring and buying signals. Outbound came in at 26%.

For an agency that grew up on outbound, that was a clear signal. It is one of the reasons we have a broader setup today. The number also explains why outbound so often fails to deliver what it promises.

How We Did It

The basis is 67 first sales calls that Nicolas Schell, co-founder of Scalantec, held between December 2025 and August 2026. Only the buyers' words were analyzed. Everything Nicolas said himself was left out. The buyers' statements added up to 1,148 topic mentions in total. Here's how they split:

Topic raised by buyersShare of mentions
Their data: CRM, data quality, scoring, buying signals59%
Outbound: emails, LinkedIn, sequences26%
Other topics15%

Two caveats apply. First, these are conversations with companies that reached out to us, so they are not a representative cross-section of the market. Second, the analysis counts how often a topic came up, not how much it mattered to each buyer. Even so, the direction is clear.

As Nicolas summed it up on LinkedIn, the agency had been selling what was easy to explain, while buyers wanted help with what was hard to fix.

Why Outbound Fails When the Layer Below Is Missing

Outbound is the visible part: the email in the inbox, the message on LinkedIn. Underneath sits a layer you can't see from the outside. It decides who you contact, when you do it, and what happens to the reply afterwards.

When that layer is missing, it shows up in familiar symptoms:

  • Your bounce rate climbs because contacts left their companies long ago.
  • Sales works through leads in the order they arrive, no matter how well they fit.
  • Replies end up somewhere, but not cleanly in the CRM. Later, nobody can say which campaign produced which deal.
  • Good accounts get contacted at the wrong time because nobody sees that something is moving there.

Sending more emails solves none of these problems. It only makes them bigger.

Three problem areas came out of the calls. Let's go through them one by one.

Problem Area 1: CRM Structure and Data Quality

What buyers say

Paraphrased, we heard statements like these:

  • "Our CRM was set up by someone who has since left. It roughly works, but it's rudimentary."
  • "We have duplicates, and deals aren't attached to the right company."

What's behind it

B2B data goes stale all the time. People change jobs, companies move, domains change. This is called data decay. A CRM that nobody actively maintains gets less accurate month after month. Then there is structure: if it isn't clear which fields are required and what a deal stage means, everyone on the team enters something different.

What you can do

  1. Decide which fields really matter for your sales team and make them required.
  2. Clean up duplicates thoroughly once, then set rules so no new ones appear (deduplication).
  3. Plan data hygiene as an ongoing task, not a one-off project.

How to choose the right CRM and roll it out cleanly is covered in our guide on choosing a B2B CRM.

Problem Area 2: Enrichment and Lead Scoring

What buyers say

Paraphrased, we heard statements like these:

  • "Our people are on the phone all day, but we don't know who they should call first."
  • "We need to get more out of our existing sales team, not hire more people."

What's behind it

A contact with a name and an email address isn't enough to decide whether it's worth your time. For that you need company data such as size, industry and the software they use. You get this data through data enrichment, ideally from several sources in sequence (waterfall enrichment), because no single provider finds everything. Only on that basis can lead scoring work, giving every lead a value: how well does the company fit you, and how much interest is it showing?

What you can do

  1. Write down your ICP concretely enough that it can be turned into filters.
  2. Enrich your existing customers first. Who stays longest, who buys the most? That tells you what your scoring should look for.
  3. Start with a simple score built on a few criteria and refine it based on real closed deals.

More on this in our article on lead nurturing and lead scoring.

Problem Area 3: Signals That Show Who Is Ready to Buy

Typical questions

Two examples of how questions in this area typically sound:

  • "How do we find out when an account is actively looking?"
  • "Can we pick up job changes or new job postings automatically?"

What's behind it

A company can match your ICP perfectly and still have no need right now. Buying signals shift the focus from "fits" to "fits now". Typical signals include a new decision maker, a funding round, job postings for a specific role, or repeat visits to your website. Organizing your sales around them is called signal-based selling.

Signals do come at a price, though. Every signal has to be checked again regularly, and that costs data credits. That's why it pays to sort accounts into tiers: check your most important target accounts often and the rest less often.

What you can do

  1. Pick two or three signals that actually showed up in your past closed deals.
  2. Send those signals straight into the CRM, not into a separate spreadsheet.
  3. Link every signal to a clear next action for sales.

Which signals have proven themselves in practice is what Nicolas discusses in the podcast episode on sales signals.

What This Means for Your Outbound

None of this means outbound is unnecessary. It remains the channel through which you start new conversations. But outbound is only as good as the data it runs on. A great email to the wrong contact at the wrong time achieves nothing.

In practice, we recommend this order:

  1. Clean up first: settle your CRM structure, remove duplicates, update outdated contacts.
  2. Then prioritize: enrich your data and set up a simple scoring model.
  3. Then add signals: bring a few proven signals into the CRM.
  4. Then scale: put outbound on top of this foundation, through cold email and LinkedIn.

This work falls under RevOps: the function that makes sure marketing, sales and customer success work from the same reliable data.

What We Learned

One observation from our own business fits the picture: proposals we built around the data layer came out about a third bigger.

Key takeaway: When outbound doesn't work, the cause often sits one layer deeper, in the data it runs on.

Your Next Step

Suspect your CRM is the real problem? With our Revenue Operations service, we clean up and complete your CRM, whether it's HubSpot, Salesforce or Microsoft Dynamics, score every lead, and bring buying signals to where your sales team works.

Frequently Asked Questions

Why isn't our outbound working?

Often the problem is not the message but the data underneath it. Outdated contacts push up your bounce rate, missing lead scoring keeps sales busy with the wrong accounts, and without signals your message lands at the wrong moment. In 67 first sales calls, buyers talked about their data 2.3 times as often as about outbound.

How can I improve CRM data quality?

Start by defining required fields and clear meanings, for example what each deal stage stands for. Then remove duplicates, refresh outdated contacts through data enrichment, and set up rules so the data stays clean. Data hygiene is an ongoing job, not a one-off project.

What comes first: cleaning up the CRM or launching outbound?

In most cases the CRM. Outbound on messy data burns contacts and budget. A sensible order is clean up, enrich and score, add signals, then scale outbound.

What are buying signals in B2B?

Buying signals are events suggesting that a company may need something right now, such as a new decision maker, a funding round or relevant job postings. They help you prioritize accounts not only by whether they fit, but by whether they fit now.

Is your bottleneck in the CRM or in outbound?

In a free 30-minute call we go through your CRM, lead scoring and buying signals with you and work out what to fix before your next outbound push.

Book a Call
Nicolas Schell
Co-Founder & CEO, Scalantec

Nicolas Schell is co-founder and CEO of Scalantec. Before Scalantec he worked at McKinsey and Celonis. Today he and his team build outbound and RevOps systems for B2B companies, and he organizes Clay Club Berlin.

Related articles